·
INDIRECT HEATING SYSTEMS
· PRODUCT LAMINATING
· PRODUCT TEMP READING AND CONTROL
INDIRECT
HEATING SYSTEMS
Requirement:
Indirect fired heating system to improve the curing of Fibre Glass Car Bodies.
Working in conjunction with the fibreglass supplier and utilising the very latest temperature profile controllers, the system was designed to provide a totally uniform airflow with a temperature accuracy of + / - 1c across the full 24 to 48 hour recipe profile.
For further information
see 'Indirect Heating Systems' in the
products section
Proctor Process Plant were commissioned to develop a bespoke gas fired, multi-row infra-red heating system for use in the manufacture of laminated car interiors. The system was required to accurately melt epoxy powder on a continuous production line, and was designed not only to ensure that the airflows did not disturb the powder, but also to avoid damage to the product substrate through excessive heat.
For further information see 'Infra- Red Heat Systems' in the product section.
PRODUCT
TEMP READING AND CONTROL
Requirement: Accurate
temperature control of existing combustion equipment for use on an automotive
interior production line
The system incorporated non-contact temperature sensors supplied, together with ancillary equipment that would allow the sensors to be fitted in the optimum position, despite the ambient temperature exceeding 130C. Upon installation the new system achieved a uniformity of + / 2-3C, and this resulted in increased production speeds together with a significant improvement in product quality.
For further information see 'Instrumentation' in the product section.